6
Method 2:
1. Reset the satellite router to the factory seings, and then
power it on. To avoid mutual interference, place two routers
near each other but keep the distance between them greater
than one meter so that the network can be configured
successfully.
2. When the satellite router's system indicator turns blue or
white (the indicator color depends on the specific model), the
main router will automatically discover the satellite router,
and the Internet indicator of the main router will blink slowly
(one blink per second).
3. Press the Mesh buon on the back of the main router, and the
Internet indicator will begin to blink quickly (two blinks per
second), indicating the Mesh networking starts.
4. When the Internet indicator of the satellite router remains lit,
the networking is successfully completed. Place the satellite
router in the room that needs network coverage.
To Next Page
Loading...
Need help?
General
