Xiaomi BPLDS03DM User Manual

10
How to Use
Press and hold the buon to switch between direct breeze and
natural breeze. The indicator is off while in direct breeze mode and is
on while in natural breeze mode. Aer the fan is turned off and turned
back on again, the mode will be the last used one.
Switching Mode
Enable/Disable Oscillation
Press the buon to cycle through the scheduled turn-off times: 1
hour, 2 hours, 3 hours, 4 hours, and disabled, and the corresponding
indicator(s) will light up (see table below). Five seconds aer using the
scheduled turn-off function, the indicator(s) resume to indicate the
corresponding status of the current speed.
Scheduled Turn-off
Note: means the indicator is on; means the indicator is off.
Scheduled
Indicator
1 hour 2 hours 3 hours 4 hoursDisabled
For more scheduled turn-off options (up to 8 hours), please go to the Mi Home/Xiaomi
Home app.
Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default
angle of 90°. Unplug then plug the fan in or reset the Wi-Fi connection then turn on the fan, the
fan will automatically oscillate its angle if enabling the oscillation function. The oscillation time
varies depending on different angles, please wait with patience.
Press the buon to enable or disable oscillation. You can set the
oscillation angle range in the app. Aer the fan is turned off and turned
back on again, the oscillation seing will be the last used one.
This product works with Mi Home/Xiaomi Home app*. Control
your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will
be directed to the connection setup page if the app is
installed already. Or search "Mi Home/Xiaomi Home" in the
app store to download and install it. Open Mi Home/Xiaomi
Home app, tap"+"on the upper right, and then follow
prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on your
device should be taken as the default.
Note: The version of the app might have been updated, please
follow the instructions based on the current app version.
Connecting with Mi Home/Xiaomi Home App
Simultaneously press and hold the buons and . Once
you hear a long beep, the fan is awaiting a connection, then
you can pair it with a device via the app.
Connecting to Wi-Fi
Adjust the Airflow Direction
Gently li or push down the
fan's head or fan grille to
adjust the airflow upwards
or downwards.
23° upwards
16 °downwards

Xiaomi BPLDS03DM Specifications

General

Brand	Xiaomi
Model	BPLDS03DM
Category	Fan
Language	English