No projected image
Screen display error
Operating system crashes
Other internal system errors
Turn off the projector and unplug the power cord. After 5 minutes, plug the power
cord back in and turn on the projector. Then, pair the remote control again.
Clear obstacles around the projector, wait for it to cool off, and turn it on again.
Contact the after-sales service team.
Issues Solutions
Unplug the power cord. Then, plug it back in and turn on the projector.
Turn off the projector and unplug the power cord. Then, plug the power cord back in
and turn on the projector.
Troubleshooting
Couldn't operate with the new
remote control
The projector automatically
turns off due to overheating
Remote control malfunction
Pair the remote control before use.
10
To Next Page
Loading...
