Safety Precautions:
Do not place this projector on an unstable platform, stand or table so as to prevent it from falling and causing serious damage or personal
injury.
Do not look directly into the lens when the projector is turned on to avoid eye damage.
Do not attempt to disassemble this projector as it may contain dangerous high voltage components. This projector must only be
maintained and repaired by a qualified or authorized technician.
Do not expose this projector to rain or moisture (operating humidity is 20%–80%).
Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got
into its housing, and have it checked by a qualified technician before using it again.
Do not place this projector in any of the following environments:
• In poorly ventilated or narrow spaces.
• Near devices that produce a strong magnetic field.
• In direct sunlight.
• In extremely hot, cold or humid environments.
• Close to a fire alarm.
Risk of explosion if the battery is replaced by an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of
flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Caution:
02
To Next Page
Loading...
