3
WARNINGS:
· Do not use any third-party battery, power cord, or omni station. The robot vacuum can only be
used with the model JZ2202 omni station.
· No action needed from users to shift the omni station between 50 Hz and 60 Hz, and the product
can adapt itself for both 50 Hz and 60 Hz.
· Do not dismantle, repair, or modify the battery or the omni station on your own.
Batteries and Charging
· Do not vacuum up hard or sharp objects.
· The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
· Do not wipe the robot vacuum or the omni station with a wet cloth or rinse them with any liquid.
After cleaning washable parts, fully dry the parts before reinstalling and using them.
· Make sure the robot vacuum is turned off when being transported and kept in its original
packaging if possible.
· Please use this product in accordance with the instructions in the user manual. Users are
responsible for any loss or damage arising from improper use of this product.
To Next Page
Loading...
