XIEGU G90 - Page 4

Signal Test:
UTC
Mode
Frequency
ID
TX signal
RX signal
Distance
7:11
SSB
14270
BDXXXXX
59+20
59+
1200KM
7:38
CW
14017
R5XXXXX
599
599
5800KM
7:50
CW
14010
UNXXXXX
599
599
3600KM
7:57
CW
14023
BGXXXXX
539
559
1550KM
Specifications:
Frequency Range: 3 MHz～30MHz
Supported Modes: A1A (CW), J3E (SSB), A3E (AM), F3E (FM), F7M (C4FM), F1B (FSK)
Power Supply Voltage: DC 12V ～ 18V
Power Supply Current: Standby 0.2A | Transmit 12A
Input SWR: <2.0: 1
Input / Output Impedance: 50 ohms (± 10%)
Through Loss: less than 0.5dB
Power Gain: greater than 15dB (± 2dB)
Maximum Input Power: 10W
Maximum Output Power: Input 5W, frequency <21MHz, power supply 15V = 100W
Input 5W, frequency> 21MHz, power supply 15V = 70W
Low-pass Filter Frequency: 33MHz (-6dB)
Harmonic Output: greater than -50db (even order), greater than -30dB (odd order)
Spurious Output Suppression: greater than 40dB
Input / Output Connector: SMA-K
Working Temperature: 0-50 ℃
Storage Temperature: -20-70 ℃
Storage Humidity: less than 55%
PTT Trigger Level: + VCC-2V (low trigger), GND + 5V (high trigger)
PTT Trigger Current: 2Ma
Warning:
1. Output with an open circuit or short circuit is prohibited.
2. Standing wave ratio > 2.5 is prohibited.