Xilinx Alveo U200 User Manual

Upgrade
The following steps require XRT 2019.2 or later to be installed. For older installed versions of the
XRT, see v1.5 of Geng Started with Alveo Data Center Accelerator Cards (UG1301).
1. Restore the card to the original manufacturing state by following the instrucons in Appendix
C: Reverng the Card to Factory Image.
2. Remove the current XRT and installed plaorm(s).
$ sudo apt remove xrt
3. Follow the installaon procedures outlined in Chapter 4: Installing the Deployment Soware.
Downgrade
The following steps require XRT 2019.2 or later to be installed. For older installed versions of the
XRT, see v1.5 of Geng Started with Alveo Data Center Accelerator Cards (UG1301).
To downgrade perform the following steps.
1. Restore the card to the original manufacturing state by following the instrucons in Appendix
C: Reverng the Card to Factory Image.
2. Remove the current XRT and installed plaorm(s).
$ sudo apt remove xrt
3. Follow the installaon procedures outlined in the chapter "Installing the Deployment
Soware" in v1.5 of Geng Started with Alveo Data Center Accelerator Cards (UG1301).
Uninstalling Packages in Ubuntu
To completely uninstall the Alveo XRT and installed deployment plaorm packages, run the
following command in a Linux terminal. Uninstalling XRT also uninstalls the deployment plaorm.
$ sudo apt remove xrt
Appendix A: Changing XRT and Target Platform Versions
UG1301 (v1.8) February 5, 2021 www.xilinx.com
Getting Started with Alveo Accelerator Cards 42
Send Feedback

Xilinx Alveo U200 Specifications

General

Brand	Xilinx
Model	Alveo U200
Category	Computer Hardware
Language	English