Xilinx Zynq-7000 ZC702

Zynq-7000 All Programmable SoC ZC702
Evaluation Kit
Quick Start Guide
The Zynq®-7000 All Programmable (AP) SoC ZC702 Evaluation Kit provides a platform for evaluating Xilinx
Zynq-7000 AP SoC devices. The ZC702 kit contains the necessary hardware, tools, and IP to quickly evaluate and
start the development of your embedded system.
This guide provides a kit overview and step-by-step instructions to set up and configure the board, run the built-in
self-test (BIST), install Xilinx tools, and redeem the license voucher.
ZC702 Evaluation Kit
For more information, visit www.xilinx.com/zc702.
X-Ref Target - Figure 1-1
(WKHUQHW
&URVVRYHU
&DEOH
3RZHU
6XSSO\
=&
%DVH%RDUG
86%
+XE
86%7\SH$WR
0LQL%$GDSWRU
6'&DUGZLWK
5HIHUHQFH'HVLJQ
86%&DEOHV
7\SH$WR0LQL%
DQG7\SH$WR
0LFUR%
+'0,
&DEOH
;LOLQ[9LYDGR
'HVLJQ6XLWH
,QVWDOODWLRQ'9'

Xilinx Zynq-7000 ZC702 Specifications

General

Manufacturer	Xilinx
Model	ZC702
Series	Zynq-7000
FPGA Family	Zynq-7000
FPGA	XC7Z020
FPGA Logic Cells	85, 000
Processor	Dual-core ARM Cortex-A9
Processor Speed	667MHz
System Memory	1 GB DDR3
Storage	SD Card Slot
Display	HDMI
Video Output	HDMI
Expansion Slots	1 x FMC
Clocking	Programmable clock generator
Operating Temperature	0°C to +85°C
Power Supply	12V DC
Ethernet	10/100/1000 Mbps Ethernet
USB	USB 2.0
Expansion	FMC (FPGA Mezzanine Card)
Dimensions	150 mm x 150 mm
Flash Memory	128 MB QSPI

Summary

Zynq-7000 Evaluation Kit Overview

Kit Components and Purpose

Overview of the ZC702 kit, its hardware, tools, and IP for evaluation and development.

Built-In Self-Test (BIST) Setup and Execution

Install Driver and Terminal Emulator

Instructions for installing USB-to-UART drivers and a terminal emulator program.

Configure Board Connections and Power

Steps for setting DIP switches, connecting the computer via USB, and applying power.

Configure Terminal Emulator Settings

Steps to select the correct COM port and serial port settings in the terminal emulator.

Set Serial Port Parameters

Setting baud rate, data bits, parity, stop bits, and flow control for the serial port.

Initialize and Run BIST Tests

Reinitializing the board and interacting with the terminal to run BIST tests.

Install Xilinx Tools and License

Redeem Vivado License Voucher

Instructions for redeeming the provided Vivado Design Suite license voucher code.

Install Vivado Design Suite

Guide to installing the Vivado Design Suite using the provided DVD or download.