Xilinx Zynq-7000 User Manual

Zynq-7000 AP SoC and
7 Series Devices
Memory Interface
Solutions v4.1
User Guide
UG586 November 30, 2016

Xilinx Zynq-7000 Specifications

General

Series	Zynq-7000
Number of Cores	Dual-core
Processor Speed	Up to 1 GHz
Device Type	SoC
Logic Cells	Up to 350K
DSP Slices	Up to 900
External Memory Interfaces	DDR3, DDR2, LPDDR2
I/O Standards	LVCMOS, HSTL, SSTL
Operating Temperature	-40°C to +100°C (Industrial), 0°C to +85°C (Commercial)
Package Options	Various BGA packages
I/O Voltage	3.3V

Summary

Chapter 1: DDR3 and DDR2 SDRAM Memory Interface Solution

Introduction

Overview of the DDR3 and DDR2 SDRAM Memory Interface Solution, its architecture, and features.

Features

Highlights enhancements in 7 series FPGA memory interface solutions over earlier families.

Chapter 2: QDR II+ Memory Interface Solution

Introduction

Details the QDR II+ SRAM Memory Interface Solution, its architecture, and usage.

Chapter 3: RLDRAM II and RLDRAM 3 Memory Interface Solutions

Introduction

Explains RLDRAM II/III Memory Interface Solutions, covering architecture, usage, and simulation.

Chapter 4: LPDDR2 SDRAM Memory Interface Solution

Introduction

Introduces the LPDDR2 SDRAM Memory Interface Solution, its core components, and features.

Features

Details enhancements in LPDDR2 SDRAM solutions, including performance and hardware blocks.

Chapter 5: Multicontroller Design

Introduction

Describes specifications, supported features, and pinout rules for multicontroller designs.

Chapter 6: Upgrading the ISE/CORE Generator MIG Core in Vivado

Appendix A: General Memory Routing Guidelines