Xinje TH765-M - Page 30

Step3: download the project into TH.
Please note PFW0~PFW256 are occupied by the TH system, please select register start from
PFW257.
10. setting:
Para tab:
Screen: select the start screen number when TH is power on.
Password: there are 9 levels password, the level 9 password has the highest priority. The higher level
password can used to all the elements of lower level password.
The password is used to protect the element or screen, when input the correct password, the button or
screen can be used.
Screen save: to protect the LCD. After certain time, the background light will be off or jump to certain
screen.
Alternation tab:
D
isplay number can select decimal or
hex.
Set FF: set all the data to FFFF.
Reset 0: set all the data to 0.
C
hange
screen control:
C
hange the screen ID according to the value of the
register.
Report current screen ID:
The current screen ID will show in the register.
For example, change screen control D0=1, TH
displays No.1 screen, report current screen ID
D1=1.