Xinje TH765-M - 7 Application; Adjust the Touch Area

7. Application
7.1 Adjust the touch area
The touch area adjustment function can make the component touch more precise.
Ø The adjustment steps:
Step 1: turn on the DIP switch 3, then power on the TH again, it will show the following screen:
Step2: After clicking the cross center, the adjust cross will jump to the second position. Keep on click the
cross until the cross jump to the last position 5.
Step 3: Please see the detailed motion:
Adjust cross
● Click the center of the adjust cross
● Turn on switch 3
OFF
ON
2
1
3 4
Calibrate the touch panel
Repeat as the target moves around the screen
Calibrate the touch panel
Repeat as the target moves around the screen
1
2
3
4
5