(2) select the lamp tab, change the aspect of the lamp.
(2) select the twinkle tab, change the lamp state to stop twinkle.
(3) color and position tab are similar to the button.
6.3 simulate offline
Do not have to download the project into the TH, you can simulate the project in the touchwin software. It
can save debug time and easy to edit.
(1) click to enter simulate offline screen.
(2) click the reverse button to see the ON/OFF switching of the lamp.
Turn off the reverse button turn on the reverse button
Thus, the simulate operation is finished.
To Next Page
Loading...