Xinje TH765-M - 6 Make a Simple Project; Build a New Project

6. Make a simple project
In this chapter, make a switch to control the PLC output, in order to explain how to make TH project.
NOTE
6.1 Build a new project
(1) Open the touchwin version 2.C.2 or above software.
(2) Click File/New or to build a new project.
(3) Select the correct TH type and com port device type
TH type com port device type
(4) Set the com port device communication parameters according to PLC port device
Please make sure the TH type and communication device type, it is important for the project
download and device communication.