(4) click the button to see the lamp ON/OFF.
Turn off the reverse button turn on the reverse button
When click the reverse button, the PLC output Y0 will switch ON/OFF at the same time.
6.5 Download the project
There are two modes to download the project into the TH:
(1) USB port downloading
Connect TH USB-B port and PC with USB cable, power on the TH, click to download the project.
(2) COM1 port downloading
Change COM1 to download mode, please refer to chapter 4.3, power on the TH, click
to download
the project.
USB port and USB cable
COM1 port and Xinje special cable
To Next Page
Loading...