Xinje TH765-M - Menu

5.2.3 Menu
5.2.3.1 File
The file menu is shown as the following:
9. PFW set:
Step1: set the PFW register range, click “Add” to add the register in the list.
Change the range then click “Modify”, it will show below message, click ‘Yes” to confirm the modify.
Step2: set the value in the range
Double click the PFW range, it will show data setting window:
1. New:
B
uild a new file
2. Open: Open a file
3. Close: Close a file
4. Save: Save a file
5. Save as: Save a file as another name and path
6. Download:
to download project into TH
7. Run-online: connect PLC and TH, Simulate online in TH
software.
8. Run-offline: simulate offline , simulate the touch screen
action in the software.