Xinje TH765-M - Page 53

(3) Save tab
(4) Control tab
This tab is used to control the export.
Execute status: to show if it is in exporting state via bit state. If the bit is ON, TH is exporting data.
Execute result: show the export result state via the register state.
0- export failed
1- export target device does not exist
2- the memory is not enough
3- file path error
4- reading / writing file failed
Execute process: show the exporting process via register, 100 means the exporting process is succeed.
(5) Date time
EXAMPLE:
This chapter will introduce the data export examples in loop and line mode.
<A> Data export in loop mode
Purpose: collect the data via history data map, export the data to moveable device and save as CSV file.
Please see the whole process:
Export
the
data
PSW300 value
increase 10 every
1 second, use
function field to
realize it.
Collect data
by history
data map
Save the data
in the
registers start
from
PSW400
Produce
CSV file
Collect object is
PSW300
Process:
Data
collection
Data export
Produce data
source
S
ave the data in touch screen internal
registers.
To add
the
date in the CSV file.
Please select the data format and time
format in the pull down menu.