Xinje TH765-M - Page 62

(2) Data tab
Please note the title list items must be the same as the CSV file items.
(3) Save tab
(4) Control tab
Execute status: to show if it is in importing state via bit state. If the bit is ON, TH is importing data.
Execute result: show the import result state via the register state.
0- import failed
1- import target device does not exist
2- the memory is not enough
3- file path error
R
egister capacity: the import data group quantity
Register mode:
Loop: the data will be stored in the object
registers in loop mode, so the original data will be
covered.
Line: the data import to the object register one
after another.
Add, delete, move up, move down, title….:
Add the data title in the list, and select the data
format, type, bit length,etc.
T
here are 4 items in the title list.
There are four items in the CSV file.
The import registers address.