XP3 PLC/HMI Hardware Manual Page 36 of 42 LMAN007_R2V2
Set each touch key’s function and parameter:
Manual Function: Screen jump; jump to screen 5
Automatic Function: Screen jump; jump to screen 4
Monitor Function: Screen jump; jump to screen 2
Parameter Function: Screen jump; jump to screen 3
3. Finish editing [Master Control] screen.
4-1-2 Edit the monitor screen
Screen Elements: one title, nine textual description, six indicator lamps, one data monitor unit,
one dynamic indicator unit and one screen jump key
1. The title:
Place one
key in the screen, change the value as “Monitor Screen”, Choose “Inverse”, click
key to modify it and drag the title to the proper place.
To Next Page
Loading...
