XLT Systems SC60 User Manual

15
f) Press and hold the “PROG” button on the frontside of the Dry Contact
Transmitter until the lift begins to move briefly.
g) The three positions are memorized by the Dry Contact Transmitter which
automically quits its programming mode.
NOTE TO PROGRAMMER:
(i) Please program AMX or Crestron contact closure to trigger the lift by
‘pulse’ only.
(ii) Please do not hold the contact closure for more than 3 seconds, the
record will be deleted.
Programming button
PROG button

XLT Systems SC60 Specifications

General

Brand	XLT Systems
Model	SC60
Category	Scissor Lifts
Language	English