How to improve signal acquisition on XM Satellite Radio onyX XDNX1?
To ensure your XM Satellite Radio Car Receiver acquires a signal, make sure the vehicle is outdoors with a clear view of the sky. Also, verify the Magnetic Mount Antenna is mounted outside the vehicle and away from any obstructions.
What to do if XM Satellite Radio onyX XDNX1 Car Receiver says 'Check Antenna Connection'?
If you see a 'Check Antenna Connection' message on your XM Satellite Radio Car Receiver, ensure the antenna cable is firmly plugged into the PowerConnect Vehicle Dock and that the cable isn't bent or broken. Try turning your onyX off and on to reset the message. If the Magnetic Mount Antenna cable is damaged, consider replacing the antenna.
Why does my XM Satellite Radio onyX XDNX1 Car Receiver audio fade or have static?
If the audio on your XM Satellite Radio Car Receiver fades or has static, check all cables for a secure connection. If using PowerConnect, the issue might be interference from another FM station; try finding an unused FM channel. As alternative, connect the audio using the Aux In Cable or a Cassette Adapter. Consider using an FM Direct Adapter, if other solutions don't work.
Why is there no audio from my XM Satellite Radio Car Receiver with Aux In or Cassette Adapter?
If you're not getting audio on your XM Satellite Radio Car Receiver when using the Aux In Cable or Cassette Adapter, check all cable connections between your onyX and your vehicle’s stereo system to ensure they are firm and secure. Also, make sure you've selected the correct input source on your car's stereo. If you're using the Vehicle Dock from the Universal Xpress Car Kit, switch off the FM Transmitter in the onyX and raise the audio level of the onyX.
Why am I not receiving all channels on my XM Satellite Radio onyX XDNX1 Car Receiver?
If your XM Satellite Radio Car Receiver isn't receiving all subscribed channels, first ensure you've activated your service. Then, go to www.xmradio.com/refresh and follow the directions to refresh your radio. If problems persist, call 1-800-967-2346 for assistance.
How to fix soft audio on XM Satellite Radio Car Receiver?
If the audio from your XM Satellite Radio Car Receiver sounds too soft, raise the volume of your stereo system or increase the audio level of your onyX until the sound quality improves.
What to do if XM Satellite Radio onyX XDNX1 Car Receiver is always updating?
Your XM Satellite Radio Car Receiver is updating with the latest encryption code. Wait until the update is complete. You may be trying to tune to a channel that is blocked or unavailable, in this case tune to another channel.
Why does my XM Satellite Radio Car Receiver keep loading?
When your XM Satellite Radio Car Receiver displays 'Loading', it is acquiring audio or program information. This message usually disappears within a few seconds.
What does 'Channel Off Air' mean on XM Satellite Radio Car Receiver?
The 'Channel Off Air' message on your XM Satellite Radio Car Receiver means the selected channel is not currently broadcasting. Tune to another channel.
General| Power Supply | 12V DC |
|---|---|
| Audio Output Mode | Stereo |
| Subscription | SiriusXM |
| Product Type | Receiver |
| Category | Receiver |
| Brand | SiriusXM |
| Type | Receiver |
| Compatibility | SiriusXM Satellite Radio |
Details the key features and functionalities of the onyX satellite radio device.
Outlines essential safety precautions and proper care instructions for the device to prevent damage or injury.
Provides guidance on selecting a safe and visible location for mounting the onyX radio in a vehicle.
Detailed steps for installing either the dash mount or the vent mount for the radio.
Instructions for selecting the best location and mounting the magnetic antenna on the vehicle.
Step-by-step guide on how to route and hide the antenna cable within the vehicle.
Instructions for connecting the magnetic mount antenna and power adapter to the PowerConnect Vehicle Dock.
Guides the user through the process of activating their SIRIUS XM service and radio.
Enables users to lock specific channels or categories using a 4-digit code.
Addresses common problems like acquiring signal and checking antenna connections.
Helps resolve issues such as 'Channel Off Air', 'Loading' messages, and audio sounding too soft.
Provides solutions for audio problems related to Aux In, Cassette Adapter, or PowerConnect.
To Next Page
