XM Satellite Radio onyX XDNX1 User Manual

60
FM Presets
FM presets make it easy to quickly access stored FM channels and choose a new FM
channel from them.
Use FM presets when you use PowerConnect to listen to your onyX
through your
vehicle’s FM radio. (Refer to “Option 3: PowerConnect Installation Instructions” on
page 43 for more information.)
To start using a different FM preset:
1 Press FM to display the current FM
preset.
2 To display and select the next FM
preset, press FM. The radio will tune
to the displayed FM channel. If the
preset is the one you want, press
menu or wait for the screen to
timeout.
3 Repeatedly pressing FM will cycle
through the FM presets.
4 Set your vehicle’s FM radio to the
same FM channel.
IMPORTANT! You need to ensure that
your vehicle’s FM radio is tuned to the
same FM channel.
Set your vehicle radio to the
above channel to enable audio.
99.3 FM
103.7 FM
Set your vehicle radio to the
above channel to enable audio.
Using Your onyX

XM Satellite Radio onyX XDNX1 Specifications

General

Brand	XM Satellite Radio
Model	onyX XDNX1
Category	Car Receiver
Language	English