86
Jump Settings
The jump button can be configured to either jump to the traffic and weather
channel of one of the 20 most congested cities, or to jump back to the last channel
to which you were listening. When configured for traffic/weather, you’ll need to
select a desired city from the list.
To configure jump:
1 Press menu.
2 Press to scroll to and highlight
JUMP Settings and press the Select
button.
3 Mode will be highlighted with either
Last Channel or Traffic/Weather.
If you want to change the mode,
press the Select button. Otherwise,
just leave it as shown. (Repeatedly
pressing the Select button toggles
between the choices.)
4 If you have selected Last Channel, press and hold menu to return to the
main display screen. If you have selected Traffic/Weather continue with
step 5.
5 Press to scroll to and highlight Set Location and press the Select
button.
JUMP Settings
Mode
Set Location
Traffic/Weather
_ _ _
Configuring Your onyX
To Next Page
Loading...
Need help?
General
