94
Demo Mode
Your onyX has a demo mode that starts playing when, for a prolonged period of
time (more than 5 minutes), the radio either detects it’s not connected to the
antenna, or the antenna stops receiving a signal. It disappears when the antenna
is connected properly or when the radio starts receiving a signal. You can also exit
demo mode at any time, by pressing and holding the Select button for 10 seconds.
If desired, you can also manually put the onyX in demo mode.
The ability for onyX to enter demo mode is enabled by default. If you don’t want
onyX to ever enter the demo mode, you can disable the demo feature. You can
enable it again at another time if desired.
To enable or disable the demo mode:
1 Press menu.
2 Press to scroll to and highlight
Demo Mode and press the Select
button.
3 Status will be highlighted. Press
the Select button to toggle the
setting between enabled or disabled.
(Repeatedly pressing the Select
button toggles between the choices.)
4 If you have selected disabled, press and hold menu to return to the
main display screen. If you have selected enabled continue with step 5.
Demo Mode
Status
Enter Demo Mode
enabled
Configuring Your onyX
To Next Page
Loading...
Need help?
General
