39
Option 1: Aux In Cable Installation Instructions
1 Plug one end of the Aux In Cable into the green AUDIO connector
on the dock.
2 Plug the other end into
the auxiliary input jack
connection of your
vehicle’s stereo system.
3 Insert the dock into the
mount.
4 Insert your onyX into
the dock.
5 Power on your onyX by pressing the Power
button.
6 Be sure the vehicle is outside and the antenna
has a clear view of the sky. Verify that you are
receiving the XM signal. There should at least
be one bar on the lower left corner of the main
AUDIO ANT PWR FM
2
3
4
5
6
7
8
9
0
direct
jump
FM
menu
1
2
3 4 5 6 7 8 9 0
direct
jump
FM
menu
To Next Page
Loading...