Press the rotate button to rotate the child safety seat
360 degrees.
Note! After trip, rotate the seat in both clockwise and
counterclockwise directions, To make sure that the
rotating part of the child car seat is fully engaged.
When the seat is rotated to 90o, as shown in figure a,
the child can be placed on the safety seat.
NOTE! The car cannot be placed in this position when
driving (see picture a).
Pull the recline handle up which is in the bottom of body
shell.
Pull the body shell at the same time, Then adjust the angle
of the seat. The seat have 5 recline positions as shown in
the figure below.
Different groups use different reclining levels.
Rearward facing:Group 0+ I( 0-18KG ): Fifth Level
Forward facing:Group I( 9-18KG ): First Level to Fourth Level
Group II III( 15-36KG ): First Level
INSTRUCTION
EN
p
5.5 Adjust the seat rotation angle 5.6 Adjust the Angle of the Child Safety Car Seat
NOTE! When used in rearward facing, you
need to rotate the seat to a 90-degree position
(as shown in Figure a), pull the recline handle,
and adjust the angle to the most inclined
position,then you can turn the seat to rearward
facing position.
a
NOTE! You need to rotate the seat to a 90-degree position
(as shown in P13 Figure a), pull the recline handle, and
adjust the angle to the most inclined position,then you can
turn the seat to fifth position.（see5.5）
To Next Page
Loading...