XP-PEN Deco mini4 - 1.3. Mouse Mode; Note:; 1.4. Current Screen

can be used to test pen pressure.
Image 3
1.3. Mouse Mode
Absolute (Pen) Mode:
Standard graphics tablet mode;
Each point of the graphics tablet
absolute point on your computer display.
Relative (Mouse) Mode:
Mouse mode; The graphics tablet'
s work area does not correspond to absolute points on your
computer display and your pen works
Note:
Only when you are in Relative Mode can you adjust the cursor
1.4. Current Screen
The graphics tablet may be configured for use with single or dual monitors.
If only one monitor is selected, y
our graphics tablet input will be limited to that particular monitor.
Custom Display Mapping:
The dimensions of your graphics tablet
top-left and bottom-
right to customize.
0、90、180 & 270 angles:
The graphics tablet are set up for 0, 90, 180 and 270 angles and when you set it, you must also
rotate your graphics tablet.
８
Image 3
-3: Click Sensitivity & Current Pen Pressure
Each point of the graphics tablet
'
s work area corresponds to an
absolute point on your computer display.
s work area does not correspond to absolute points on your
computer display and your pen works
as a standard mouse.
Only when you are in Relative Mode can you adjust the cursor
's speed.
Image 3-4: Mouse Mode
The graphics tablet may be configured for use with single or dual monitors.
our graphics tablet input will be limited to that particular monitor.
The dimensions of your graphics tablet
's on-
screen work area can be changed here. Please click the
right to customize.
The graphics tablet are set up for 0, 90, 180 and 270 angles and when you set it, you must also
s work area corresponds to an
s work area does not correspond to absolute points on your
The graphics tablet may be configured for use with single or dual monitors.
our graphics tablet input will be limited to that particular monitor.
screen work area can be changed here. Please click the
The graphics tablet are set up for 0, 90, 180 and 270 angles and when you set it, you must also