Xpresskit OptimaX series User Manual

CHALL
Remote cart starter and alarm interface
Interface pour démarreurs à distance et
systèmes de sécurité
INSTALLATION
GUIDE
© 2011 Directed Electronics. All rights reserved.
www.xpresskit.com
Rev: 20110601
Update Alert: Firmware updates are posted to the web on a regular
basis. We recommend you check for firmware and/or install guide
updates prior to installing this product.
Avertissement de mise à jour : Des mises à jour de micrologiciels sont
affichées sur le Web sur une base régulière. Nous vous
recommendons de vérifier si des mises à jour de micrologiciels et/ou
de guides d’installation sont disponibles avant d’installer ce produit.
tm
D I G I T A L O E M I N T E G R A T I O N
REQUIRED FIRMWARE VERSION 2.08 or up
Version requise du micrologiciel 2.08 et plus

Xpresskit OptimaX series Specifications

General

Brand	Xpresskit
Model	OptimaX series
Category	Automobile Accessories
Language	English

Summary

Installation Guide Introduction

Required Firmware Version

Specifies the minimum firmware version required for installation.

Product Description and Wiring

Main Harness Connections

Details the wire assignments for the 16-pin main harness.

Vehicle Compatibility Guide

D2D Compatibility Check

Programming Procedure Part 1

Initial Programming Setup

Steps 7 & 8: Connecting module and ignition for programming.

Vehicle Ignition and Remote Start

Steps 9 & 10: Ignition ON, OEM remote unlock, and starting vehicle.

Finalizing Programming Sequence

Step 11: Ignition OFF, OEM remote lock, and programming button press.

Programming Procedure Part 2

Vehicle Start Confirmation

Steps 10/11: Verifying vehicle start and LED status.

Finalizing Programming (OEM/Non-OEM)

Step 12: Completing programming using OEM or non-OEM remote.