Xterra EU100 - Assembly Instructions; Front and Rear Stabilizer Installation

6
EU100 Elliptical
1. Attach the Front Stabilizer (2) to the front of the Main Frame
(1), fasten with two Carriage Bolts (8), two Curved Washers
(6) and two Domed Nuts (7).
2. Repeat for the Rear Stabilizer (4) to the rear of the Main
Frame (1).
EU100 Assembly Instructions
Hardware Step 1
Front Stabilizer and Rear Stabilizer
4 Carriage Bolts (#8)
4 Curved Washers
(#7)
4 Domed Nuts (#7)
1