SB550 Fitness Bike
11
Operation of Your Console
SB550 Console
Power Up
The SB550 tness bike is supplied with an external power supply. When power is connected
to the tness bike, the console will automatically power up. If there is no input to the console
for 20 minutes, the console will go to stand-by mode to save energy. To turn the console on
press any key.
When initially powered on the console will perform an internal self-test. During this time
all the lights will turn on. When the lights go o the dot matrix display will show a software
version (i.e.: VER 1.0) and the time and distance windows will display an odometer reading.
The odometer reading displays how many hours the tness bike has been used and how
many virtual miles the tness bike has gone.
The odometer will remain displayed for only a few seconds then the console will go to the
start up display. The dot matrix display will be scrolling through the dierent workout proles
of the programs and operating instructions. You may now begin to use the console.
Convenient cargo
compartment for
phone or MP3 player
Easy-Touch
Control Buttons
Swivel Fan to
keep you cool
Integrated Speakers
for MP3 Player
Audio Input Jack
for customized
listening
Large LCD with
scrolling feedback
and scrolling
message center
To Next Page
Loading...
Need help?
General
