EasyManua.ls Logo

Xtool Anyscan A30M - Settings

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
BMS Reset
The BMS (Battery Management System) allows the scan tool to
evaluate the battery charge state, monitor the close-circuit current, register the
battery replacement, and activate the rest state of the vehicle.
Gearbox Match
When the gearbox is disassembled or repaired (the car
battery is powered off), it will cause the shift delay. In this case, you need to
perform this operation so that the gearbox can automatically compensate
according to the driving situation to achieve better shift quality.
SRS Reset:This function resets the airbag data to clear the airbag collision
fault indicator.
TPMS Reset:This function allows you to quickly look up the tire sensor IDs
from the vehicle
s ECU, as well as to perform TPMS replacement and sensor
test.
Air Suspension
This function can adjust the height of the body. When
replacing the body height sensor in the air sus pension system, or control
module or when the vehicle level is incorrect, you need to perform thisfunction
to adjust the body height sensor for level calibration.
Throttle Relearn
Elec. Throttle Adaption is to utilize the car decoder to
initialize the throttle actuator so that the learning value of the ECU returns to
the initial state.
Headlight Adjustment
This feature is used to initialize the adaptive
headlamp system.
Tire Refit
This function is used to set the size parameters of the modified or
replaced tire.
Window Initialization
This feature is designed to perform door window
matching to recover ECU initial memory, and recover the automatic
ascending and descending function of power window.
Electronic Water Pump Activation
Use this function to activate the
electronic water pump before venting the cooling system.
Seat Matching
This function is applied to match the seats with memory
function that are replaced and repaired.
Disable Transport mode
ln order to reduce power consumption, the following
functions may be disabled, including limiting the vehicle speed, not waking up
the door opening network, and disabling the remote control key, etc.At this

Related product manuals