4
HOST PORTS
Figure 1-3 Sample of Tablet Host Ports
① DOIP port: Supports ECU programming for vehicles with DOIP
protocol
② USB 3.0 port: Used for data transfer for tablet & PC communication,
and data transfer with VCI box when working.
③ VGA port: A reserved interface can be used for charging.
④ DC charging port: Charging port, connected to the power adapter
to charge the device.
⑤ Power button: Long press to turn the device on/off, short press to
switch the device into sleep mode. Hold for about 20 seconds to
force shut down the device.
To Next Page
Loading...
Need help?
General
