Xtool D9 Pro User Manual

74
Figure 5-24 Sample of injector coding function (screen 3)
5. Wait until the message ‘Write successfully’ pops up.
6. Turn off the ignition switch.
7. Wait until the message asked you to turn on the ignition
switch.
8. Re-enter the Fuel injection nozzle injection volume
adjustment menu to check whether the new value(s) are
shown.
Figure 5-25 Sample of injector coding function (screen 4)

Xtool D9 Pro Specifications

General

Brand	Xtool
Model	D9 Pro
Category	Diagnostic Equipment
Language	English