Operation Manual
44
Operation Manual
44
Operator Cab
Frame Level Indicator
The frame level indicator is mounted on the upper right
corner of the operator’s cab. The frame level indicator allows
the operator to view if the forklift has been positioned in a
level condition.
Figure 51. Frame Level Indicator
Boom Extend Letters
As the boom is extended, the boom extend letters on the left
side of the boom are visible to the operator. These letters
indicate boom extension as it corresponds to the load capacity
charts.
Figure 50. Boom Extend Letters
Boom Angle Indicator
The boom angle indicator is located on the left side of the
boom and is visible from the operator’s seat. Use the boom
angle indicator to determine the boom angle when referring
to load capacity charts. Refer to the LOAD CAPACITY CHARTS
section of this manual for more information.
NOTE: The boom angle indicator is a plumb arrow with
angular graduations from -5 to +70
Figure 49. Boom Angle Indicator
Warning
DO NOT try to lift or handle heavy
components without the use of appropriate
lifting equipment.
Warning
DO NOT use attachments that are corroded
excessively.
• All the attachments should be stored in an appropriate
enclosure as to prevent corrosion and deterioration due
to environmental conditions.
• Inspect the forklift and the attachments periodically for
corrosion.
To Next Page
