XtremepowerUS 75025 - User Manual

This document serves as the owner's manual and safety instructions for the XtremePower Variable Speed 1.5HP Above Ground Pool Pump, model #75025. It provides essential information for the safe and effective operation, maintenance, and troubleshooting of the pump.

Function Description

The XtremePower variable speed pump is designed for the pre-filtering and recirculation of water in swimming pools and spas. It is suitable for various water applications, including waterfalls, cleaners, heaters, and salt chlorine systems. The pump is engineered to work with clean water at temperatures not exceeding 104°F (40°C). Its primary function is to circulate water through the filtration system, ensuring the pool or spa water remains clean and clear. The variable speed capability allows for precise control over flow rates, optimizing energy consumption and adapting to different operational needs.

Usage Features

The pump features a user-friendly LED control panel that allows for easy operation and programming. It offers three pre-programmed schedules: Regular Mode (ECO, CLEAN, BOOST) and two additional scheduled modes (MODE 1 and MODE 2).

Regular Mode:

• ECO (default 1500RPM): This setting is designed for energy-efficient operation, with an adjustable speed range from 1000 to 2400 RPM.
• CLEAN (default 2400RPM): This mode is for general cleaning, with an adjustable speed range from 2400 to 2850 RPM.
• BOOST (default 3250RPM): This setting provides maximum power for intensive cleaning or rapid water turnover, with an adjustable speed range from 2850 to 3450 RPM.

Users can adjust the pump speed in 50 RPM increments while running in ECO, CLEAN, or BOOST modes by using the arrow buttons on the control panel. These settings are automatically saved.

Scheduled Modes (MODE 1 and MODE 2): These modes allow users to set up specific running schedules with multiple stages (S1, S2, S3, S4), each with its own start time, running duration, and default speed.

• MODE 1: Offers a 16-hour running cycle with four stages. For example, S1 might run for 3 hours at 2400 RPM starting at 6:00 AM, and S2 might run for 5 hours at 1500 RPM starting at 9:00 AM.
• MODE 2: Offers a 24-hour running cycle, also with four stages, allowing for continuous or extended operation. For example, S1 might run for 6 hours at 1500 RPM starting at 12:00 PM, and S2 might run for 3 hours at 2400 RPM starting at 6:00 AM.

The control panel includes a "STOP" button to halt pump operation, a "MENU" button to access settings, and "ENTER" to save changes. Arrow buttons facilitate navigation and adjustment of time and speed settings. The LED screen displays current time, running speed, and alarm conditions.

Start-up Procedure: Upon power-on, the display shows the current time. When any of the ECO/CLEAN/BOOST buttons are pressed, the pump initiates a 5-minute high-speed run at 2850 RPM to eliminate air and prevent dry grinding of the impeller, thus reducing the risk of leakage. After this initial phase, the pump reverts to the default speed of the selected program.

Advanced Features:

• Safety Lock-out: Prevents unauthorized changes to pump speed settings.
• Built-in Diagnostics: Protects the pump from common failures such as freezing and voltage irregularities.
• Permanent Magnet Motor: Ensures high efficiency and reliability.
• Balanced Hydraulics: Contributes to quiet operation, especially at lower, energy-saving speeds.
• Oversized Debris Basket: Provides extra leaf-holding capacity, reducing the frequency of maintenance.
• Record Keeping: The pump can keep records of scheduled programs for up to 15 days after a power-off event.
• Gradual Acceleration/Deceleration: Implements step-by-step changes in speed to extend the pump's lifespan.

Maintenance Features

The manual emphasizes the importance of proper installation and regular inspection to ensure the pump's longevity and safe operation.

• Pre-filtering: The pump is designed with pre-filtering capabilities, which helps protect the main pump components from debris.
• Debris Basket: The oversized debris basket is a key maintenance feature, designed to capture a large volume of leaves and other debris, thereby reducing the frequency of cleaning required. Regular emptying of this basket is crucial for maintaining optimal pump performance.
• Drain Plug: The pump includes a drain plug (part #48860105080) for easy draining, which is particularly useful for winterization or when servicing the pump.
• Error Codes and Alerts: The control panel displays alerts and warnings via LED indicators and error codes (e.g., locked rotor, input voltage issues, motor phase-break, no-load, system error). These diagnostics aid in identifying and troubleshooting potential problems, allowing for timely intervention. For instance, if an input voltage is too low (code 8), the pump may still operate for a short period due to residual energy, but it's advised to wait until the screen is off before restarting.
• Component Breakdown: The manual includes a detailed parts breakdown (e.g., strainer cover, basket, impeller, seal assembly, motor) to assist with identification and potential replacement of components, although it notes that some parts are not available individually.
• Professional Servicing: For complex issues or repairs, the manual strongly recommends that work be performed by qualified and licensed technicians to ensure safety and proper function. Any modifications to the pump require prior consent from the manufacturer, and only original replacement parts are authorized to maintain safety and warranty.

The pump is designed for ease of operation and maintenance, with features aimed at reducing energy costs and extending product life. However, adherence to safety guidelines, particularly regarding electrical connections and suction entrapment hazards, is paramount. Regular inspection of drain covers and prompt replacement of damaged components are critical for preventing serious injury or death.