1110
AUTO START SELECTOR
- ALWAYS ON The amplifier will never go into standby, it will always be on.
- TRIGGER 12V The amplifier will go into standby in absense of 12V trigger signal.
- AUTO ON The amplifier will go into standby in absense input signals.
TRIGGER 12V
- TRIGGER 3.5 mm mono jack for pre-amplifiers that support trigger out.
INPUT SELECTOR
- RCA Set when using RCA unbalanced input audio cables.
- XLR Set when using XLR balanced input audio cables.
STEREO or BRIDGED
- STEREO Regular stereo amplification mode.
- BRIDGED/BTL Bridged mono (bridge-tied load) amplification mode.
CLIPPING LED
- CLIPPING Blue clipping indicator LED (blinking).
To Next Page
Loading...
