XTZ EDGE A2-400 - Technical Specifications; Amplifier Performance Specs; Power Consumption and Dimensions

2322
Technical Specications
EDGE A2-400
Amplication type
Power
Frequency response
Damping Factor
Dynamic range
Standby Power Consumption
Idle Power Consumption
Auto On
Standby mode timer
Inputs (RCA, XLR)
Input impedance (RCA, XLR)
Outputs (RCA) Loop Out
Outputs (binding posts)
Output impedance
Dimensions (WxDxH)
Weight
ICEpower
®
- ICEedge CLASS D Amplier
2 x 420 W (1% THD, 4 Ω)
2 x 220 W (1% THD, 8 Ω)
1 x 800 W (1% THD, 8 Ω) (BTL)
20 Hz – 50 kHz (+/- 0.25 dB)
>600 (8 Ω, 20 - 500 Hz)
>113 dB with 4 Vrms input signal
>107 dB with 0,44 mVrms input signal
(A-weighted at 2x400 W, 4 Ω)
US mains: 0.19 W, EU mains: 0.25 W
US mains: 18.4 W, EU mains: 17.5 W
3 mV trigger level
>10 minutes
High Quality RCA Connections, NEUTRIK A-Series Connectors
>25 kΩ, >25 kΩ
High Quality RCA Connections
High Quality Copper binding posts (CMC
®
)
<18 mΩ, (20 - 2000 Hz)
200 x 352 x 69(*80) mm | 7.9 x 13.9 x 2.7(*3.1) inches (*with feet)
3.1 kg | 6.3 lbs