12
EQ
This control allows you to adjust characteristics of the subwoofer to match the room and speakers in your
system. EQ “equalization” aims to get as even frequency response as possible in your sound system.
The subwoofer has a switch marked with “EQ”, this allows you to choose between three dierent EQ
“Characteristics” settings.
Sound Adjustments (EQ, Port Tuning, PEQ)
- REF Gives a extended frequency response for the deepest bass, however the lower frequencies can
be over represented and “muddy”, depending of the room geometrics, placement of the sub and
listening position. (Reverberation)
- EQ1 Is a direct countermeasure to the “muddy” bass problem of over represented low bass/room
gain, by lowering the bass extension, the bass will be more controlled.
- EQ2 Stores more energy a bit higher in the frequency, recognized as a more punchy fast bass
English
To Next Page
Loading...
