25
Speaker
Placement
To achieve the best results the front speakers should be placed symmetrically in front of the listener. The
distance between the front speakers should be about 80% of the distance to the listener. In other words, the
recommended angle between the front speakers is 45°.
Finally
Please remember that good sound is a matter of taste, so you have to experiment to obtain your favorite
one. We wish you best of pleasure.
Warning!
Your new subwoofer is equipped with special protection circuitry to provide maximum performance with
greatest reliability.
The protection circuitry prevents overheating and operates constantly without being audible. In some extreme
situations (e.g. sustained high output levels in warm environments), the unit may shut down momentarily.
This indicates operation of the thermal or over-current protection circuitry. If this should happen, turn the
Amplier o with the main power switch, and let it rest for 10 min before you turn it back on. If the same issue
occurs again, please contact XTZ personnel.
WARNING: There is no protection circuit for longterm excessive volume use for some parts in the amplier
and speaker driver, in this case critical components may break due to sheer exhaustion.
Note: If clear audible distortion appears at high volumes, it is recommended to lower the volume.
LED Indicator
LED Color Function
Protect RED In protect mode*
* In the unlikely event that an over-current or over-temperature situation should occur, the Protection LED will
turn on and the amplier will be in protect mode. Turn the Amplier o with the main power switch, and let
it rest for 10 min before you turn it back on. If the same issue occurs again, please contact XTZ personnel.
Protection circuitry
To Next Page
Loading...
