XTZ SA-1 - Introduction; Safety Instructions

4
Introduction
We would like to thank you for buying the SA-1 amplier. The electrical design of the amplier o󰀨ers the
ultimate in sound reproduction. In order to utilize your new device in the best possible way, please read
this manual carefully before using it for the rst time. It often takes some e󰀨ort and patience to make a HiFi
system sound its best. If you don't have any previous experience from this kind of installations, please feel
free to contact our free of charge support and we will help you. (See Support on the last page of this manual)
Safety instructions
Switch o󰀨 your amplier before connecting to your sound source. Make sure that the signal cables have a
strong connection to the signal source.
Make sure that the electronics are not exposed to direct sunlight or strong articial light. Listening
to high sound pressure levels over a longer period of time may harm your hearing. To avoid hearing
damage do not listen to high sound levels over a longer period of time.
English