Need help?Do you have a question about the Xylem Bell & Gossett e-80SC Series and is the answer not in the manual?
General| Materials of Construction (Casing) | Cast Iron |
|---|---|
| Frequency | 60 Hz |
| Connection Type | Flanged |
| Type | Centrifugal Pump |
| Voltage | 208-230/460 V |
| Phase | 3 |
| Maximum Fluid Temperature | 250°F (121°C) |
| Minimum Fluid Temperature | 32°F (0°C) |
| Impeller Material | Bronze |
| Shaft Material | Stainless Steel |
| Motor Type | TEFC |
| Motor Enclosure | TEFC |
| Series | e-80SC Series |
| Inlet Size | 2 in |
| Outlet Size | 2 in |
| Size | 2 in |
General safety precautions, warnings, and hazard identification for users.
Guidelines and warnings for safely lifting the pump assembly using appropriate equipment.
Details on mechanical seal options, operating temperature, and fluid compatibility.
Precautions and guidelines before installing the pump, including electrical and environmental checks.
Essential checks and procedures before initiating pump operation.
Steps to fill the pump body with liquid before starting to prevent dry running.
To Next Page