Need help?Do you have a question about the Xylem Bell & Gossett e-80 Series and is the answer not in the manual?
General| Model | e-80 Series |
|---|---|
| Series | e-80 |
| Category | Water Pump |
| Manufacturer | Xylem Bell & Gossett |
| Type | Centrifugal Pump |
| Materials of Construction | Cast Iron, Bronze, Stainless Steel |
| Impeller Type | Closed |
| Operating Temperature | Up to 250°F (121°C) |
| Voltage | 208-230/460V |
| Impeller Material | Bronze or Stainless Steel |
| Housing Material | Cast Iron |
| Seal Type | Mechanical Seal |
| Connection Type | Flanged |
| Frequency | 60 Hz |
| Flow Rate | Varies by model |
| Head | Varies by model |
| Horsepower | Varies by model |
| Material | Cast Iron |
| Motor Type | TEFC (Totally Enclosed Fan Cooled) |
| Phase | 3-Phase |
| Maximum Temperature | 250°F (121°C) |
| Weight | Varies with model |
| Dimensions | Varies with model |
General safety warnings, terminology, and user precautions.
Key safety rules, required equipment, and environmental considerations for users.
Safety guidelines and proper methods for lifting the pump unit.
Technical specifications for mechanical seals, temperature, and pH ranges.
Essential checks and safety measures before installing the pump.
A guide for ensuring correct piping installation and support.
Illustrates common installation arrangements for the pump.
Critical precautions and checks before initiating pump operation.
Step-by-step guide for safely starting the pump and monitoring its operation.
General guidelines and warnings for safe and efficient pump operation.
Key safety warnings and general steps for taking the pump apart.
Critical safety warnings to follow before disassembling the pump.
Procedure for safely draining the pump before maintenance.
Instructions and warnings for impeller removal.
Terms and conditions for commercial product warranty.
Warranty terms for personal or household product use.
To Next Page
