Product Description
Products included
Pump model Approvals
2125.181
2125.320
Standard
2125.051 MSHA (Mine Safety and Health Administration, USA):
30CFR Part 18, Approval number X/P-3769-0
2125.690 European Norm
• ATEX Directive
• EN 1127-1, EN 50014, EN 50018
• I M2 EEx d I
International Norm; not for EU member countries
• IECEx scheme
• IEC 60079–0, IEC 60079–1
• Ex dl
Pump design
The pump is submersible, and driven by an electric motor.
Intended use
The product is intended for moving waste water, sludge, raw and clean water. Always
follow the limits given in Application limits (page 38). If there is a question regarding the
intended use of the equipment, please contact a local sales and service representative
before proceeding.
WARNING:
In explosive or flammable environments, only use Ex- or MSHA-approved pumps.
NOTICE:
Do NOT use the pump in highly corrosive liquids.
For information about pH, see Application limits (page 38).
Particle size
The pump can handle liquid containing particles that correspond to the holes in the
strainer.
Number of holes Hole dimensions
186 6×50 mm (0.24× 1.96 in.)
For more information about the strainer, see Dimensions and weights (page 42).
Pressure class
MT Medium head
Product Description
Flygt 2125 Installation, Operation, and Maintenance Manual 11