Need help?Do you have a question about the Xylem HYDROVAR HV 4.110 and is the answer not in the manual?
General| Model | HYDROVAR HV 4.110 |
|---|---|
| Category | Controller |
| Frequency | 50/60 Hz |
| Output Power | 11 kW |
| Control Method | Sensorless Vector Control |
| Protection Class | IP55 |
| Ambient Temperature | -10°C to +50°C |
| Communication Interfaces | Modbus RTU, BACnet |
| Relative Humidity | 95% non-condensing |
| Cooling Method | Air-cooled |
Utilisation of a diaphragm pressure tank on the discharge side to maintain line pressure and avoid pump run-on at zero demand.
Ambient temperature, storage temperature, humidity, air pollution, altitude, class of protection, and certifications for the HYDROVAR.
Electromagnetic compatibility requirements for first (domestic) and second (industrial) environments.
Overview of wiring and connection points on the HYDROVAR MASTER/SINGLE Inverter, including power supply, motor connections, and terminal blocks.
Introduction to software parameters, noting differences between MASTER and SINGLE Inverters and global parameters.
To Next Page