Need help?Do you have a question about the Xylem HYDROVAR HV3.7f and is the answer not in the manual?
General| Brand | Xylem |
|---|---|
| Model | HYDROVAR HV3.7f |
| Category | Controller |
| Language | English |
Details the included hardware for mounting the HYDROVAR unit, such as cable glands and PTC components.
Covers protective measures like earthing, residual current devices, circuit breakers, and internal/external protections.
Guidelines for ensuring electromagnetic compatibility through proper cable installation and grounding.
Illustrates internal components and wiring points for different HYDROVAR series.
Details the main voltage terminals for power supply and motor connection for various HYDROVAR models.
Instructions for connecting the motor, including PTC sensor mounting and star/delta wiring.
Detailed description of control terminals (X1, X2, X5, X6) and their functions for external connections.
Practical examples of connecting transducers, indicators, and setting required values and offsets.
Overview of the control panel display and buttons for different HYDROVAR models.
Explains the function of each push button on the control panel for navigation and operation.
Explains the JOG mode for manual control, allowing direct setting of speed and frequency.
Procedures for sensor zero-point adjustment, curve selection, and setting sensor range.
Selects the operating mode for the HYDROVAR, such as Controller, Multicontroller, Synchronous, or Actuator.
Saves all parameter changes to EEPROM, preventing data loss during power failure.
To Next Page