Xylem Lowara e1631 User Manual

en - Translation of the original instructions
1 Introduction and Safety
CAUTION:
1.1 Introduction
Description of user and installer symbols
Purpose of this manual
Specific information for personnel in charge of installing
The purpose of this manual is to provide necessary information for:
the product in the system (plumbing and/or electrical
aspects) or in charge of maintenance.
• Installation
• Operation
• Maintenance
Specific information for users of the product.
CAUTION:
Read this manual carefully before installing and using the
product. Improper use of the product can cause personal in-
jury and damage to property, and may void the warranty.
Instructions
The instructions and warnings that are provided in this manual concern
the standard version, as described in the sales document. Special ver-
sion pumps may be supplied with supplementary instruction leaflets.
Refer to sales contract for any modifications or special version charac-
teristics. For instructions, situations, or events that is not considered in
this manual or the sales document, contact the nearest Lowara Serv-
ice Center.
NOTICE:
Save this manual for future reference, and keep it readily available at
the location of the unit.
1.1.1 Inexperienced users
1.3 Disposal of packaging and product
WARNING:
Observe the local regulations and codes in force regarding sorted
waste disposal.
This product is intended to be operated by qualified person-
nel only.
1.4 Warranty
Be aware of the following precautions:
For information about warranty, see the sales contract.
• Persons with diminished capacities should not operate the prod-
uct unless they are supervised or have been properly trained by a
professional.
• Children must be supervised to ensure that they do not play on or
around the product.
1.5 Spare parts
WARNING:
Only use original spare parts to replace any worn or faulty
components. The use of unsuitable spare parts may cause
malfunctions, damage, and injuries as well as void the guar-
antee.
1.2 Safety terminology and symbols
About safety messages
It is extremely important that you read, understand, and follow the
safety messages and regulations carefully before handling the product.
They are published to help prevent these hazards:
CAUTION:
Always specify the exact product type and part number
when requesting technical information or spare parts from
the Sales and Service Department.
• Personal accidents and health problems
• Damage to the product
• Product malfunction
For more information about the product's spare parts, see Figure 1 ,
Figure 2 , or Figure 3
Hazard levels
1.6 EC DECLARATION OF CONFORMITY
Hazard level
Indication
XYLEM SERVICE ITALIA S.R.L., WITH HEADQUARTERS IN VIA VIT-
TORIO LOMBARDI 14 - 36075 MONTECCHIO MAGGIORE VI - ITA-
LIA, HEREBY DECLARES THAT THE FOLLOWING PRODUCT:
A hazardous situation which, if not
avoided, will result in death or se-
rious injury
DANGER:
ELECTRIC PUMP UNIT (SEE LABEL ON FIRST PAGE)
A hazardous situation which, if not
avoided, could result in death or
serious injury
FULFILS THE RELEVANT PROVISIONS OF THE FOLLOWING EU-
ROPEAN DIRECTIVES:
WARNING:
CAUTION:
• MACHINERY DIRECTIVE: 2006/42/EC (THE TECHNICAL FILE
IS AVAILABLE FROM XYLEM SERVICE ITALIA S.R.L.).
• ELECTROMAGNETIC COMPATIBILITY 2004/108/EC
• ECO-DESIGN 2009/125/CE, REGULATION (EC) No. 547/2012,
REGULATION (EC) 640/2009 (3 ~, 50 Hz, PN≥ 0,75 kW) IF IE2
or IE3 MARKED
A hazardous situation which, if not
avoided, could result in minor or
moderate injury
• A potential situation which, if
not avoided, could result in
undesirable conditions
• A practice not related to per-
sonal injury
NOTICE:
AND THE FOLLOWING TECHNICAL STANDARDS
• EN 809, EN 60335-1, EN 60335-2-41, EN 62233
• EN 61000-6-1:2007, EN 61000-6-3:2007
• EN 60034–30
• EN 953 :1997+A1:2009
• EN ISO 12100 :2010
Hazard categories
• EN 60204-1 :2006/A1:2009
Hazard categories can either fall under hazard levels or let specific
symbols replace the ordinary hazard level symbols.
PUMP (SEE LABEL ON THE FIRST PAGE)
Electrical hazards are indicated by the following specific symbol:
FULFILS THE RELEVANT PROVISIONS OF THE FOLLOWING EU-
ROPEAN DIRECTIVES
Electrical Hazard:
• MACHINERY 2006/42/EC (THE TECHNICAL FILE IS AVAILA-
BLE FROM XYLEM SERVICE ITALIA S.R.L.).
AND OF THE FOLLOWING TECHNICAL STANDARDS:
These are examples of other categories that can occur. They fall under
the ordinary hazard levels and may use complementing symbols:
• EN 809
• EN 953 :1997+A1:2009
• EN ISO 12100 :2010
• Crush hazard
• Cutting hazard
• Arc flash hazard
Hot surface hazard
Hot surface hazards are indicated by a specific symbol that replaces
the typical hazard level symbols:
3
e1631 Installation, Operation, and Maintenance Manual

Xylem Lowara e1631 Specifications

General

Brand	Xylem
Model	Lowara e1631
Category	Water Pump
Language	English