Yaesu FT-4VR - The Keypad Functions

7
The Keypad Functions
Key
Primary Function (Press Key)
Secondary
Function
(Press F +
Key)
Third
Function
(Press and
Hold for over
one second)
VFO Memory Recall
Inputting
Memory Tag
Function
Activates the
“Secondary” key
function ( ap-
pears).
Activates the
“Secondary” key
function (
appears).
Moves the cursor
to the right.
Deactivates the
“Secondary” key
function (
appears).
Enters the Set
mode.
#VFO
Switches the
band control
between VHF
(VFO-A) and FM
RADIO Broadcast
(VFO-B).
Memory Offset
Tuning
－
PMS(Program
Memory (Mode)
Scan).
Program Scan
Setting
MR
Recalls the
Memory mode
and activates the
"Memory Tune"
mode.
－
Numbers“*”, “+”,
“-”,“/”, “@”
Press and hold this
key to complete the
memory channel
registration
Dual Receive
(DW) function
Memory write
mode
P1
Recalls the stored
P1(Programmable
key) setting.
－
Stores to the Home
channel
Recalls the Home
channel.
Stores the
P1(Programma-
ble key) setting.
P2
Recalls the stored
P2(Programmable
key) setting.
－
Stores the Split
Memory.
Reverses the
transmit and re-
ceive frequencies
while working
through a repeater.
Stores the
P2(Programma-
ble key) setting.
1 Number “1”
Recalls the stored
memory channel.
Number “1”
－
Recalls the
“Weather”
broadcast
channel bank.
2
ABC
Number “2”
Recalls the stored
memory channel.
Number “2”, or
characters “A”, “B”,
“C”, “a”, “b”, or “c”
－
Activates the
ARTS feature.
3
DEF
Number “3”
Recalls the stored
memory channel.
Number “3”, or
characters “D”, “E”,
“F”, “d”, “e”, or “f”
－ －
4
GHI
Number “4”
Recalls the stored
memory channel.
Number “4”, or
characters “G”, “H”,
“I”, “g”, “h”, or “i”
－ －
5
JKL
Number “5”
Recalls the stored
memory channel.
Number “5”, or
characters “J”, “K”,
“L”, “j”, “k”, or “l”
－ －
6
MNO
Number “6”
Recalls the stored
memory channel.
Number “6”, or
characters “M”, “N”,
“O”, “m”, “n”, or “o”
－
Key Lock
feature
7
PQRS
Number “7”
Recalls the stored
memory channel.
Number “7”, or
characters “P”, “Q”,
“R”, “S”, “p”, “q”,
“r”, or “s”
－ －
8
TUV
Number “8”
Recalls the stored
memory channel.
Number “8”, or
characters “T”, “U”,
“V”, “t”, “u”, or “v”
－ －
9
WXYZ
Number “9”
Recalls the stored
memory channel.
Number “9”, or
characters “W”,
“X”, “Y”, “Z”, “w”
,“x”, “y”, or “z”
DTMF autodialer
setting
－
0
SET
Number “0”
Recalls the stored
memory channel.
Number “0” or
space
－ －