Need help?Do you have a question about the Yaesu FT-7B and is the answer not in the manual?
General| Frequency Range | 80-10 meters |
|---|---|
| Voltage | 13.8 V DC |
| Type | Transceiver |
| Modes | SSB, CW |
| Tuning Steps | 100 Hz |
Step-by-step guide for physically installing the transceiver in a mobile environment.
Important safety precautions regarding power connections and polarity.
Steps to take before initial operation and testing.
Explains how to read and interpret the frequency displayed on the tuning dial.
How to set the clarifier to zero beat for accurate frequency offsetting.
Adjusting RF tracking transformers for maximum output on each band.
Detailed description of the receiver section's circuitry.
Detailed description of the transmitter section's circuitry.
Details alignment adjustments for the control unit.
Steps to adjust SSB carrier point for proper sideband operation.
Procedure for balancing the transmitter carrier signal.
Procedure for balancing the receiver carrier signal.
Steps to adjust CW carrier level for proper transmission.
Procedure for calibrating the S-meter for accurate signal strength readings.
Adjusting the local oscillator for proper frequency mixing.
Aligning premix bandpass filters for optimal spurious response.
Procedure for balancing the premix stage.
Adjusting bandpass filters for flat response across frequencies.
To Next Page
