Yaesu FTdx3000 Series - User Manual

FTDX3000 S ERIES
CAT O PERATION
R EFERENCE B OOK
YAESU MUSEN CO., LTD.

Summary

Overview of CAT Operation

Connection Methods

Using the RS-232 C Cable

Connects the transceiver to a computer via RS-232C serial port.

Using the USB Cable

Connects the transceiver to a computer via USB port.

Control Command Structure

Alphabetical Commands

Commands consist of two alphabetical characters for transceiver control.

Parameters

Used to specify information necessary to implement a command.

Terminator

A semicolon (;) signals the end of a control command.

Yaesu FTdx3000 Series Specifications

General

Supply Voltage	13.8 VDC ±15%
Antenna Connector	SO-239
Modes	SSB, CW, AM, FM
Impedance	50 ohms
Receiver Type	Superheterodyne
Image Rejection	70 dB or better