VX-177 OPERATING MANUAL 71
SET
(
MENU
)
M
ODE
FUNCTION
Selects the alarm(s) utilized when the Emergency function is
engaged.
Selects the Internet Link Connection mode.
Selects the Access Number (DTMF digit) for WIRES™
operation.
Selects the memory register for an Access Number (DTMF
code) for non-WIRES™
Selects the LCD/Keypad Lamp mode.
Selects the Control Locking lockout combination.
Selects the MONI switch function.
Toggles the display indication between “frequency” and the
channel’s “Alpha/Numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory channels.
Enables/disables the Password feature.
Stores the password.
Selects the Scan Resume mode.
Selects the function of the
[
HM/RV
]
key.
Adjusts the RF Squelch threshold level.
Sets the Repeater Shift Direction.
Enables/disables the Priority Revert feature.
Selects the Receive-mode Battery Saver interval (“sleep” ratio)
Selects the Smart Search Sweep mode.
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan lamp while paused.
Sets the magnitude of the repeater Shift.
Selects the Memory Scan “Skip” channel-selection mode.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the synthesizer steps.
Setting of the CTCSS Tone Frequency.
Setting of the TOT time.
Enables/Disables the TX LED while the radio is transmitting.
Enables/Disables the Transmitter Battery Saver.
Enables or disables “VFO Split” operation.
Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Enables/Disables the Emergency Automatic ID (EAI) Feature.
AVAILABLE VALUES
(
D
EFAULT: BOLD ITALIC
)
EMG.BEP / EMG.LMP /
EMG.B+L / EMG.CWT /
EMG.C+B / EMG.C+L /
EMG.ALL / OFF
INT.OFF / INT.COD / INT.MEM
CODE 0 - CODE 9,
CODE A - CODE F (CODE 1)
d1 - d9
KEY / CONT / OFF
LK KEY / LKDIAL / LK K+D /
LK PTT / LK P+K /
LK P+D / LK ALL
MONI / T-CALL
FREQ / ALPHA
---
PWD.OFF / PWD. ON
---
BUSY / HOLD / TIME
<
REV
>
/
<
HOME
>
S-1 / S-2 / S-3 / S-4 / S-5 /
S-6 / S-8 / S-FULL / OFF
RPT.OFF / RPT.
–
/ RPT. +
RVT.OFF / RVT. ON
200 MS / 300 MS /500 MS /
1 SEC / 2 SSEC / OFF
SINGLE / CONT
ONLY / MEM
ON / OFF
0.00 - 99.95 MHz
(
0.60 MHz
)
OFF / SKIP / ONLY
SPL.OFF / SPL. ON
OFF / TONE / TSQL /
REV TN / DCS / ECS
5 / 10 / 12.5 / 15 / 20 / 25 / 50
/ 100 kHz, or AUTO
50 CTCSS tones (100 Hz)
1MIN - 30MIN or OFF (6 MIN)
LED. ON / LED.OFF
SAV.OFF / SAV. ON
VSP.OFF / VSP.ON
WIDE / NARROW
INT. 1M - INT.50M /
COM. 1M-COM.50M / OFF
SET MODE ITEM
21
[
EMG S
]
22
[
I NET
]
23
[
INT CD
]
24
[
INT MR
]
25
[
LAMP
]
26
[
LOCK
]
27
[
M/T-CL
]
28
[
NAME
]
29
[
NM WRT
]
30
[
PSWD
]
31
[
PSWD W
]
32
[
RESUME
]
33
[
REV/HM
]
34
[
RF SQL
]
35
[
RPT.MOD
]
36
[
PRI.RVT
]
37
[
RXSAVE
]
38
[
S SRCH
]
39
[
SCN MD
]
40
[
SCN.LMP
]
41
[
SHIFT
]
42
[
SKIP
]
43
[
SPLIT
]
44
[
SQL.TYP
]
45
[
STEP
]
46
[
TN FRQ
]
47
[
TOT
]
48
[
TX.LED
]
49
[
TXSAVE
]
50
[
VFO.SPL
]
51
[
WID.NAR
]
52 [EAI]
SET MODE ITEM
53
[
ANI
]
54
[
ANI.WRT
]
55
[
PAGER
]
56
[
PAG.COD
]
57 [
PAG.ABK
]
FUNCTION
Enables/Disables the ANI function.
Program the ANI Identifier.
Enables/Disables the ANI function.
Setting the Pager Code for the DTMF Pager.
Enables/Disables the Answer Back function of the DTMF Pager.
AVAILABLE VALUES
(
D
EFAULT: BOLD ITALIC
)
ANI.OFF/ANI. ON
---
PAG.OFF/PAG. ON
000 - 999
ABK. OFF/ABK. ON
The following Set Mode Items will appears when the optional FTD-7 DTMF Paging Unit is installed.
To Next Page
