Yakima RIpCord - Surfboard Transport with RipCord; Surfboard Strap Configuration; Securing Multiple Boards; Locking RipCords

1033509B-3/12
b
To carry a surfboard(s):
Loop RipCord strap under
far side of crossbar. Bring
strap over board, and under
near side of crossbar.
Push and hold button,
then thread strap through
underside, and out the
front of RipCord lock.
Pull strap end to tighten Ripcord down.
Gather extra strap and secure it.
If you have loaded multiple boards RipCord
is to be installed around all boards.
Lock both RipCords.